Self Leveling with Safety Markings

Posted on Posted in Industrial

Application of Self Leveling Epoxy with multiple colors and Safety Lane Markings


Surface Condition

This area started as old bare concrete which had small to medium craters and long and interlocking cracks


Surface Preparation

We prepared the surface using a Planetary Floor Grinder to open the concrete pores to ensure maximum bond strength of the primer. We then used Carmacoat Concrete Cleaner to some parts to remove the deep seeded oil and dirt.


Primer and Repair

We applied Carmacoat Epoxy Primer to the entire area, after curing we then used Carmacoat Epoxy Putty to fill in the craters and cracks to ensure a smooth finish free from cracks and divots.



We then applied one color of the two tone epoxy floor using Carmacoat Self-Leveling Topcoat and waited the next day to apply the other color.


Safety Lane Markings

After curing for 24 hours we then applied our 2″ Safety Lane Markings(Yellow) to the clients specification. This ensures foot and vehicular traffic division.



This was a nice and quick project that required only 2 days with one day curing for foot traffic and 3 days curing for forklift traffic. Full cure was 7 days for the full Chemical Resistance.