School Flooring Philippines

School Flooring

Posted on Posted in Commercial

School Flooring applied with Self-Leveling Epoxy

Surface Condition

This School Flooring started as a bare concrete which was poured very well by the contractor (DMCI)

Surface Preparation

We prepared the surface using a Planetary Floor Grinder with a diamond grinding attachment to open the concrete pores to ensure maximum bond strength of the primer. All this grinding was done with our Industrial Vacuum to prevent dust.

Primer and Repair

We applied Carmacoat Epoxy Primer to the entire area, after curing we then used Carmacoat Epoxy Putty to fill in the small craters and light cracks to ensure a smooth finish free from cracks and divots.


We then applied a 2mm thick Carmacoat Self-Leveling Topcoat that can easily handle the light – heavy traffic day in day out. The coating is very hygenic and has superb gloss the fits well with the facility.

Construction Joints

After curing the designer urged that we grind construction joints which was roughly 2m x 2m.


This was a successful project that required coordination with the Project Manager as well as other contractors as there were many installations and works going on at the same time.