Self Leveling Epoxy on a Lobby Floor
This lobby floor’s concrete finish was ready for a tiled floor. Heavy grinding was needed to prepare the floor for the coating.
The surface preparation team first needed to flatten the pre-tiled finish. Three(3) grindings was needed for this project. In every successful coating project surface preparation is key.
Primer and Repair
Carmacoat Epoxy Primer was applied on the entire area. We discovered the concrete was very porous. The concrete absorbed a lot of primer and there were spots that still needed to be primed. We then applied another layer of Carmacoat Epoxy Primer. After inspection the floor was now applied with Carmacoat Epoxy Putty.
Then we applied Carmacoat Self-Leveling Topcoat using a notched squeegee then back rolled with a lint free roller.
This was a nice quick project which was finished within 3 days. An extra day was needed for additional grinding and for the application of another layer of Primer.